Sumix SMX-15M5x - Manual (Page 37)

35
Last updated: June 11, 2015
Sumix Video Camera: User Guide
Tu ni ng Gu ide lin es
Only Raw frame and Monochrome modes are available as well for SMX-15M5M mono-
chrome model.
FIGURE 5.11 Color Reconstruction Modes
Select required color mode from the proposed list that contains: the Raw frame mode,
the Monochrome mode, the Nearest color mode, the Bilinear mode, the Laplacian
mode, the Simple (bin2x2) mode, the Adaptive Bilinear mode, the Bayer mode.
The Monochrome mode forces the transformation of the sensor pixels data into mono-
chrome stream.
The Nearest Color mode: Bayer matrix from the sensor is transformed into destination
stream using the Nearest Color algorithm (the fastest algorithm that gives the worst,
compared to other algorithms, image quality).
The Bilinear mode: Bayer matrix from the sensor is transformed into destination
stream using the Bilinear algorithm (a slower algorithm that gives better quality).
The Laplacian mode: Bayer matrix from the sensor is transformed into destination
stream using the Linear Interpolation with Laplacian second-order correction terms
(the slowest algorithm that gives the best quality).
5.10.2 Flip image
You can flip the image in the Video mode window horizontally and/or vertically. Check
the corresponding Flip image box/boxes of the Advanced window. Using the flip con-
trols, you can flip the image without changing the camera position itself.
FIGURE 5.12 Flip Image boxes
5.10.3 Frame Rate
You can change the frame rate for the current camera parameters (for example, fre-
quency or viewport) using the Frame Rate box of the Basic window.