Studio Technologies 50 2000 - Manual (Page 12)

Issue 4, July 2000 Model 50/51 User Guide
Page 12 Studio Technologies, Inc.
Model 38 Back Panel
Connects to talent
sources such as key-
boards or microphones
Loop thru connectors parallel the
talent inputs for routing to a digital
audio workstation, effects device,
microphone preamp, etc.
Connects to the
Model 50 or another
talent amplifier’s loop
thru connector
Connects to additional
talent amplifiers
Talent level
to phones
Power present
LED
Each Model 35 and Model 38 Talent
Amplifier can drive two sets of high-
impedance headphones (>150 Ω ). The
audio output is loud, and very “clean.”
The units feature a built-in level control,
a stereo/mono switch, and a power
present LED.
The Model 38 Talent Amplifier takes the
basics from the Model 35 and adds a
unique stereo preamplifier section. This
allows a musician’s microphone or line-
level signal to be “looped” through the
Model 38, boosted by its preamp, and
then combined with the stereo cue mix
supplied by the Model 50. This provides
each Model 38 with an individual head-
phone mix, solving the classic problem
of wanting “more me” in the phones! Like
the Model 35, the Model 38 is linked with
a Model 50 Central Controller by a single
cable.
Installation
In this section you will be installing the
Model 50 Central Controller in an equip-
ment rack. Audio input and output con-
nections will be made using the Model
50’s multitude of phone jacks. One or
Mic/Line button switches
the talent input between
microphone and line level
Model 38 Front Panel
Switch between
stereo and mono
(L only) for the
talent input
Cue mix
level to
phones
Switch between
stereo and mono
(L+R) for the cue mix
Two headphone outputs