Studio Technologies 74 - Manual (Page 44)

Model 74/75 User Guide Issue 2, January 2006
Studio Technologies, Inc. Page 45
for Surround
Dimensions (Overall):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
9.58 inches deep (24.3 cm)
Mounting: one space in a standard 19-inch rack
Weight: 9.5 pounds (4.3 kg)
Model 75 Control Console
Application: supports Model 74 Central Controller
Power: provided by Model 74 Central Controller
Output Data: generates MIDI system-exclusive
messages
Connector: 9-pin D-subminiature female
Dimensions (Overall):
7.2 inches wide (18.3 cm)
2.2 inches high (5.6 cm)
5.4 inches deep (13.7 cm)
Weight: 1.8 pounds (0.82 kg)
Model 35 Talent Amplifi er
Load: intended for connection to one or two pairs
of headphones with total impedance of 75 ohms or
greater
Maximum Output Voltage: 16 V peak-to-peak
into 150 ohms @ 1% THD+Noise
Distortion (THD+N): 0.03%
Frequency Response: 20 Hz-20 kHz ±0.5 dB
Dimensions (Overall):
4.2 inches wide (10.7 cm)
2.0 inches high (5.1 cm)
5.3 inches deep (13.5 cm)
Weight: 0.8 pounds (0.7 kg)
Specifi cations and information contained in this
User Guide subject to change without notice.
Appendix A
Controlling the Model 74
The Model 74 Central Controller uses MIDI
system-exclusive messages to control all
functions. The Model 75 Control Console
is programmed to generate a subset of
what the Model 74 is capable of doing.
By using standard MIDI messages, the
Model 74 can be used for a wide range of
special applications. Any device that can
be programmed to send system-exclusive
MIDI messages can be used to control the
Model 74.
General Notes:
All MIDI messages to be acted upon are
system-exclusive type (F0H). No channel
mode, system common, or system real
time messages are utilized.
Studio Technologies, Inc. manufacturer’s
ID number is 00H 00H 56H.
The Model 74’s product device ID
number is 07H.