Studio Technologies 74 - Manual (Page 22)

Model 74/75 User Guide Issue 2, January 2006
Studio Technologies, Inc. Page 23
for Surround
settings selected. While you are welcome
to use this function, be careful so that your
confi guration efforts aren’t wasted. Spe-
cifi cally, be aware that the reference level
is reset to minimum level. All the other
parameters are fairly easy to set up, but
resetting the reference level would require
getting out an SPL meter and a calibrated
signal source. This is a hassle you may
not need!
Infrared Transmitter
Confi guration
To support the infrared (IR) remote
talkback function an IR transmitter
module must be obtained and confi g-
ured. As of the writing of this user guide
Studio Technologies’ does not offer such
a device. The Model 75’s software was
designed to support the use of many 3rd-
party “universal” remote controls. Units
from retailer RadioShack®, priced as low
as US$10, have been used successfully.
For a talkback command to be recognized
the remote control should be programmed
to emulate an RCA DVD player’s play
command. (It’s also possible that a setting
for the Microsoft® Xbox® will also work!)
The universal remote may offer several
choices for this sequence. A little experi-
mentation may be required so that a com-
patible emulation is selected. The Model
74 requires a baud rate of 650.