Studio Technologies 74 - Manual (Page 25)

Issue 2, January 2006 Model 74/75 User Guide
Page 26 Studio Technologies, Inc.
for Surround
When an output button is pressed, these LEDs display which
output(s) are assigned to speaker systems A and B:
Press Surround A button to assign output A to speaker system A;
Press Surround B button to assign output B to speaker system A;
Press Stereo A button to assign output A to speaker system B;
Press Stereo B button to assign output B to speaker system B.
A lit LED indicates that the output is assigned to that speaker system.
Model 75 Confi guration—Speaker Systems/Monitor Outputs
Press and hold an output button
(one at a time) to display and select
which output channels are assigned
to speaker systems A and B.
Default: For Speaker System A all six channels are assigned to output A only.
For Speaker System B all six channels are assigned to output B only.
Note: A special output disable function is available. By disabling all outputs associated with either speaker system A
or B, that system will no longer be available during normal operation. This function is useful if only one output
is going to be utilized. Then during normal operation this output cannot be selected, minimizing any confusion
caused by selecting an invalid speaker system.
)
Output A Output B
Speaker
System A
Speaker
System B