Studio Technologies 74 - Manual (Page 32)

Model 74/75 User Guide Issue 2, January 2006
Studio Technologies, Inc. Page 33
for Surround
Press and hold both Surround A and Stereo B buttons for fi ve seconds to restore Model
75 factory defaults. Once defaults have been restored, the LEDs will light. After buttons
are released, confi guration mode will be exited and normal operation will resume.
Model 75 Confi guration—Restore Factory Defaults
Factory Defaults: All channels associated with each input are active.
Speaker system A all six channels are assigned to output A only.
Speaker system B all six channels are assigned to output B only.
Talkback button is set for momentary operation.
Talkback adds to cue audio mode enabled.
Talkback audio source is Model 75 mic.
Cue program audio enabled.
Additive solo mode enabled.
Upon power up, mute all function enabled.
Level control operates modifi ed logarithmic.
Level control auto mute all function enabled.
Reference level is set for fully attenuated (minimum) monitor output level.
Remote input select function disabled.
Surround A associated with remote input select function.
20 dB dim level.
Remote mute all disabled.
Remote dim disabled.
Remote talkback inputs (hard-wired and IR) disabled.
Auto dim off enabled.
Talkback dim enabled.
Stereo to mono downmix mode: mono-to-center.
3 dB attenuation when mono-to-center is active.
5.1 to stereo downmix automatically activated when stereo to mono downmix activated.
Note: The 5-second delay is a safety feature, ensuring that the factory defaults will not be accidently restored.
)