SoundTraxx Tsunami Installation - Manual (Page 20)

Tsunami Installation Guide Page 17 Tsunami Installation Guide Page 17
in the fuel tank or replace the model’s fan grills with some open-grill detail
parts. Figure 11 shows some of the modifications you might make in a diesel
installation. By milling out some of the weight in the fuel tank an enclosure
is made for the speaker. You will need to fashion a mounting plate for the
speaker and seal it well.
If you place the speaker under open fan grills, you may still wish to baffle the
speaker rather than use the body as the baffle, as it may be difficult to seal
the chassis well enough to achieve the results you want.
Figure 11 - Diesel Modifications
Installation
Mill out the metal fuel tank and create styrene
deck plate for speaker to mount.
Fabricate styrene baffle
Oval Speaker
Replace factory fan grills with
open grills (available as aftermarket
detail parts)
Speaker
Speaker
Gasket
Deck
Plate