Smithy GN1300 - Manual (Page 78)

Step 6: Set the recommended speed for the work stock material and cutter
that you are using. (See chapter 8 for setting speeds.)
Step 7: Before running the powerfeed do a “dry run” by manually feeding the
cross-slide table and carriage assembly the distance that you will be feeding
your project. This will prevent any unnecessary crashes.
Step 8: Once your speed has been set start the machine and engage the
powerfeed selector into the desired position. (Pushing the lever up will run the
powerfeed along the Y-Axis. Pushing the lever down will engage the X-Axis
powerfeed.)
Step 9: To stop powerfeeding, disengage the powerfeed by moving the lever
into the neutral position which is half way between the Y-Axis and X-Axis
engagement.
! NOTICE !
For optimum performance be certain to set the belts to run in the
upper portion of the suggested spindle rotation speed range.
9:Using Powerfeeding
9-6 Or Visit www.smithy.com