Smithy GN1300 - Manual (Page 30)

A. Tailstock Body - This is the main casting of the tailstock.
B. Off-Setting Lock Bolts -These bolts lock the top base of gthe tailstock and prevent
it from moving off center.
C. Tailstock Handwheel -This handwheel moves the tailstock barrel in and out of the
tailstock body.
D. Tailstock Lock -This locks the tailstock body to the bed ways.
E. Tailstock Barrel Lock -This locks the barrel into position.
F. Tailstock Barrel -The barrel holds the MT3 tooling that supports the end of the
workpiece.
G. Tailstock Off-Setting Bolts -These bolts allow the user to offset the toolpost for
cutting tapers.
For Granite MAX and I-MAX Series Machines
The following are some of the modifications and improvements for the Granite MAX and
Granite Industrial MAX machine series.
A. 30% Longer Millhead - An extended millhead to
accept larger workpieces for more efficient milling
operations.
B. Crash Protection System (Y-Axis) - A unique shear pin design that protects your
machine from major damage if the machine is run past its limits of travel. Found inside
the carriage assembly.
C. Electrical Overload Protection - Improvement on the powerhead section of the
machine that safely shut offs the machine for prolonged motor life.
D. Extended Tailstock Travel - Drill or ream deeper with 3” travel, also reach farther
across the table with the center securely placed in the tailstock.
E. Quick Change Toolpost (For Idustrial MAX Series
Only) - The fastest, most convenient way to change a tool.
4: Machine Overview
4-13 Or Visit www.smithy.com