Dell X51 - Manual (Page 51)

Operating the Axim 51
Connecting to a Projector
You can connect the device to a projector using a VGA cable.
NOTE:
The VGA option is available only with the Axim X51v model. The
VGA cable will not ship with your device unless you order it.
NOTE:
You need to install the Viewer program from the Dell Getting Started CD
for the device to detect the projector. To configure the program, see the Help
section in the program.
To connect the device to the projector, connect the sync connector on the
VGA cable to the device, and then connect the other connector of the
VGA cable to the projector cable. Run the Viewer program for the device
to detect the projector.
power
cord
AC adapter
sync cable
USB connector
on the computer
device connector
sync cable connector