Dell X51 - Manual (Page 101)

Getting Connected 101
To configure a device with Bluetooth wireless technology in a
Pocket PC environment:
1 Ensure that the two devices are turned on, discoverable, and within
close range.
2 Tap Start → Settings → Connections tab.
3 Tap Bluetooth → Devices tab → New Partnership. Your device
searches for other Bluetooth devices and displays them in the list.
4 Tap the name of the other device, and tap Next.
5 In the Passkey field, if you want to use a passkey (recommended
for enhanced security), enter a alphanumeric passkey between 1 and
16 characters, and tap Next. Otherwise, leave Passkey blank, and tap Next.
NOTE:
The Passkey for a remote Bluetooth device is usually found in the
user manual for that device. The default Passkey for any Dell Axim is 1234.
6 Enter the same passkey for the other device.
7 Tap Finish.
An active connection with Bluetooth wireless technology is created and
pairing of the two devices is complete.
NOTE:
For more information about using Bluetooth wireless technology, tap
Start
→
Help
→
Setting Up Connections.
Creating a Modem Connection
To create a modem connection:
1 Install a modem card and appropriate adapters to connect an external
modem to your device through the serial port.
2 Obtain the following information from your ISP:
• ISP dial-up access telephone number
• Username and password
• TCP/IP settings
Some ISPs require information in front of the username, for example,
MSN/username.
3 Tap Start → Settings → Connections tab → Connections.