Dell X51 - Manual (Page 104)

104
Getting Connected
3 Enter a name for the connection.
4 In the Host name/IP field, enter the VPN server name or IP address.
Your network administrator provides you this information.
5 Depending on the type of authentication that you want to use with
your device, tap IPSec or PPTP next to VPN type.
If you are unsure about which option to select, contact your
network administrator.
6 Tap Next and enter your username, password, and, if required, domain.
7 Install the network card driver, if required. For more information,
see the documentation that came with your network card.
8 Tap Finish.
9 To manually start a connection, tap and hold the connection, and
tap Connect.
NOTE:
A VPN connection requires physical connection to a network.
Ensure the unit is linked to a wire or wireless network before you
manually start a VPN connection.
Ending a Connection
To disconnect:
• To delete a connection, tap and hold the connection you want to
remove, and tap Delete.
• When connected through a cable or cradle, detach your device from
the cable or cradle.
• When connected through the infrared sensor, move the device away
from the computer.
• When connected through a network (Ethernet) card, remove the card
from your device.