Valve rough-in – Sloan 136 GEM 2 Exposed Flushometer User Manual
Page 2
2
VALVE ROUGH-IN
MODELS 110/111, 115
MODELS 120, 121,
122
MODEL 136
MODEL 137
MODEL 180
MODEL 186
NOTE: Requires 1” I.P.S.
(DN 25 mm) Supply.
NOTES:
• WHEN MOUNTED ON AN ADA ACCESSIBLE
BOWL, THE ROUGH-IN TO THE SUPPLY
INLET SHOULD BE NO HIGHER THAN 37½”
(953 mm) OR THE HANDLE WILL EXCEED
MAXIMUM HEIGHT ALLOWANCES UNDER
ADA GUIDELINES.
• NEW ADAAG GUIDELINES ALLOW FOR SPLIT
OR OFFSET GRAB BARS, CHECK WITH LOCAL
AUTHORITIES OR REFERENCE SECTION
604.5.2 OF ADAAG.
† 1” CONTROL STOP IS AVAILABLE WITH
WHITWORTH THREAD.
This manual is related to the following products: