One year limited warranty, Disabling internal music-on-hold on kx-tg4500, Testing the system – Skutch Electronics CK-1P User Manual
Page 4: Lights on ck-1 box
Page 4 of 5
4- The short modular cord that is attached to [1&2 to Phone] on the CK1 is not used.
Disabling Internal Music-On-Hold on KX-TG4500
1. While the base unit is in standby mode, press [MENU].
2. Press DOWN ARROW repeatedly until "Initial setting" is Highlighted, press
[ENTER].
3. Press DOWN ARROW repeatedly until "Music On Hold" is Highlighted, press
[ENTER], then [Enter] again.
4. Press DOWN ARROW once, display should read "Off". Press [Enter] to save.
5. Press [Exit]
Testing the System:
1- Pickup line 1 on your telephone. The line one LED on the SENSOR BOARD should
light up.
2- Repeat this test for lines 2-4. If all lines light up when picked up, the CK-1 is working
properly. If the lights on the SENSOR BOARD do not light up, then
a) Make sure that the CK-1P and Phone is connected to power.
b) Make sure that the SENSOR BOARD is aligned properly.
Lights on CK-1 Box.
When you place a line on HOLD, the corresponding LED on the rear of the CK-1P box
lights up to confirm the Promotion-On-Hold condition.
Using Other Brand Phones with the KX-
TG4500/4000/2000 Phone
The CK-1P will ONLY provide Promotion-On-Hold audio when a call is placed ON
HOLD from the KX-TG4000 base set or any one of it's cordless phones. You can use
other brand phones with this system as long as the phone will clear a standard ON HOLD
condition on the KX-TG4500/4000/ 2000 phone.
Tech Support - 916-786-6186
If you have any problems getting the unit to work properly feel free to give us a call.
Technical Support is available between the hours of 7:30 AM and 4:30 PM Pacific Time,
Monday through Friday.
• ONE YEAR LIMITED WARRANTY
This SKUTCH PRODUCT is warranted against defects for a period of one (1) year from the date of the
original invoice. Within this period, we will repair it without charge for parts and labor. To obtain
warranty service the product must be returned, at the customer's expense, to SKUTCH Electronics along
with a copy of the original invoice. After the unit has been repaired, SKUTCH will ship the PRODUCT