Skutch Electronics DL-4 - Manual (Page 2)

Page 2 of 7
SD Card
MIC Jack
Power Input
4 3 2 1
Telephone Lines
Installation
1- The DL-4 supports both single line per modular cord (RJ-11), or two lines per modular
cord (RJ-14) telephone jacks. There are 4 modular jacks on the rear of the DL-4.
Connect the modular cords from the wall jack to the proper jack rear of the DL-4
2- Connect the Power Adapter to the DL-4, then to a 115vac Power Outlet.
3- Connect the Microphone to the microphone jack on the back of the DL-4. The
microphone can be left connected to the DL-4 if desired.
SD Card
Mic
Power
Adapter
Modular Cords