Skutch Electronics CK-1A5 - Manual (Page 2)

Page 2 of 5
2- Set the phone on the CK-1A5 box as shown in Fig 2.
\
3- Connect the audio cord from your audio source, to the AUDIO IN jack on the back of
the CK-1 box. For DIGITAL, USB, or MP3 players, use the cable that comes with the
player, not ours. Our cable is for CD players ONLY. For DIGITAL, USB, or MP3
players, the ends of the cable will have the same type of connector (RCA). (Fig 2)
Fig 1
Line 2
Line 1/L1+L2
Audio Cable
Fig 2
To Phone Jack
on Wall