Sierra Video Ponderosa 3G Series Routing Switcher Family with MediaNav - Manual (Page 84)

SIERRA VIDEO
78
Output Module
Output modules are designed in groups of eight. This allows for expansion in groups of eight
outputs. Each output module comes with a rear “backplane” panel consisting of eight BNC
connectors.
The output module is installed from the front of the frame with the BNC panel installed directly
behind the output module in the back of the frame.
Output Module LEDs
Each output module has 5 Green LEDs located on the front edge of the board. The LEDs indicate
the status of the module’s voltage. All 5 LEDs must be lit for the module to operate properly. The
absence of any lighted LED indicates a failure of the module and the factory should be contacted.
Just behind the reset button there is a group of 6 LEDs used for de-bug purposes. The function of
the LEDs is described below.
LED Indication Normal condition Color
1 Transmit in progress Flickers On/OFF when data is transferred GREEN
2 Application has run ON GREEN
3 Boot program has run ON GREEN
4 Temperature out of range OFF RED
5 Voltage out of range OFF RED
6 Not used OFF RED
De-bug LEDs
Voltage Status
LEDs