Sierra Video Ponderosa 3G Series Routing Switcher Family with MediaNav - Manual (Page 40)

SIERRA VIDEO
34
o
Click on this button to add a Level Name. A Level Name must be added in order
to select a level, unless one already exists in the configuration.
Step 3: Add Router Mapping
Default selections for STEP 3:
1. If sources and destinations already exist, the second radio button, “Add the selected
levels to existing sources and destinations.” will be selected. Otherwise the first radio
button will be selected to create new sources and destinations.
2. When “Add the selected levels to existing sources and destinations.” is selected, “Also
add new sources and destinations if needed.” will be checked by default. These
selections allow these levels to use previously configured sources and destinations, and
if the new level has more sources or destinations than already exist, those are added.
Selecting the proper mapping:
• Add new sources and destinations for the selected levels.
o
The Source Name format will be “Src n” where “n” equals the highest Source
Number of the current sources, plus one. Numbers continue incrementing by one
up to the maximum number of Inputs defined for the new layers. If no sources
already exist, the first source will be named “Src 1.”
o
The Destination Name format will be “Dst n” where n equals the highest
Destination Number of the current destinations, plus one. Numbers continue
incrementing by one up to the maximum number of Outputs defined for the new
layers. If no destinations already exist, the first destination will be named “Dst 1.”