Sierra Video Ponderosa 3G Series Routing Switcher Family with MediaNav - Manual (Page 51)

PONDEROSA
45
Functions
Following is a list of functions that can be applied to the panel buttons.
None- This removes any programming from the button.
Level- The button will turn on or off the level specified on the Function Params list.
Destination- Selecting “Destination” allows you to select a specific destination from the
Function Params list.
Source- Selecting “Source” allows you to select a specific source from the Function
Params list.
Category- Selecting “Category” allows you to select a specific category from the
Functions Params list (provided a category was entered in the names page).
Index- If you are using a category naming method, categories are normally followed with
an index (i.e. 1,2,3…..or A,B,C…..) enter an index number in the Function Params
window.
Take- Initiates command
Select- Moves cursor
Shift- The shift function similar to a standard computer keyboard, allowing you to
program another set of functions, names, or actions.
Select/Shift- “Select/Shift” is a dual mode function. Pressing once is the “Select” function
(moves cursor). Holding down the button is the “Shift” function similar to a standard
computer keyboard.
Scroll Back- Causes lists to display from higher number to lower.
Scroll Forward- Causes lists to display from lower number to higher.
Clear- Clears current entry.
Backspace- Causes cursor to move back one character space.