Sierra Video Ponderosa 3G Series Routing Switcher Family with MediaNav - Manual (Page 39)

PONDEROSA
33
STEP 2: Add Router Layers
The second step in configuring a new routing switcher adds one or more layers to the
routing switcher. This step includes creation or selection of the following parameters:
• Layer Number
• Layer Name
• Quantity of Inputs
• Quantity of Outputs
• Signal Type,
• Level and Level Name
Multiple layers and levels can be created. Details about this step are as follows:
Limits:
• Layer number values can range from 1 to 128.
• Layer name and level name limited to 20 characters.
Behaviors:
o
The table will be populated with a single layer row.
• Delete Layer is disabled when there is only one level in the table.
• Read from Router
o
This button does not appear for a virtual routing switcher or if the connection is
serial.
o
If the read succeeds, the Layer name displayed will be the “Level Name” in
Sierra Host protocol. The protocol limits this name to 6 characters. The routing
switcher may have a longer level name BUT the protocol will truncate it to 6
characters.
• Add Level Name