Sierra Video Pro XL Series 8 - Manual (Page 36)

SIERRA VIDEO
30
Split Switching (break-away);
 A “split” (break-away) switch is when the video and audio of a single source is sent to
different outputs.
 Press V/A until screen displays “Preset V/A”.
 Press [Select] until “Dst” is flashing.
 Choose the Destination (output) using the rotary knob.
 Pressing [Select] will cause the screen to toggle between Dst, the video and audio
source, the video source only, or the audio source only.
 Toggle through the screens and select the source(s) you want to change using the
rotary knob.
 Press [Take] to activate the switch.
Switching by Level;
Switching by Level allows you to specify the level you want to switch. This mode
of switching is intended for multi-frame multi-level systems.
 Press V/A until screen displays “Preset Level”. (Level should be flashing.)
 Pressing [Select] will cause the screen to toggle between Level, Dst, and Src.
 Choose the Level using the rotary knob.
 Choose the Destination (output) using the rotary knob.
 Choose the Source (input) using the rotary knob.
 Press [Take] to activate the switch.
Status
Momentarily pressing the “Menu” button causes the display to toggle through 2 different modes;
 “Preset AFV”- This mode is used for switching the router (see above).
 “Status”- Pressing the “V/A” button will cause the status to switch between;
 “Status by Source”
 “Status by Destination”
 “Status by Level”
Turn the rotary knob to select the source, destination, or level you want to status.