Sierra Video Pro XL Series 8 - Manual (Page 25)

INSTALLATION
19
Ethernet Setup
Default IP settings;
IP Address- 192.168.1.200
Subnet mask- 255.255.255.0
Gateway IP Address- 0.0.0.0
Telnet Port- 10001
The IP port accepts all Sierra Video Systems HOST protocol commands.
To configure the IP port the router must first be connected to your computer. This can either be
done using a crossover cable to connect your PC to the routing switcher directly, or the routing
switcher may be added to your existing network. The routing switcher defaults to an IP address
of 192.168.1.200 which will not conflict with other devices in most system. If there is an address
conflict, a crossover cable must be used to configure the routing switchers Ethernet port.
Once your PC and the routing switcher are on the same Ethernet network, open your internet
browser and type in the default address of the routing switcher in the address line of the internet
browser.
This will open a web page stored in the SVS router. Router information is displayed on this page.