Seaward 100 PrimeTest - Manual (Page 20)

PrimeTest 100 Operating Instructions
18
Environmental rating
IP Rating IP40
Operating temperature range 0°C to 40°C, without
moisture condensation.
Storage temperature range –25° to 65°.
Note:
Batteries should be removed prior
to storage.
Overvoltage category 300V CAT II
5 Maintenance
Clean only with a dry cloth; do not use solvents.
Before use, ensure unit is clean and dry; visually
inspect all leads, connectors, and case. Any
damage or wear must be rectifi ed to preserve user
safety.
Check the battery contacts and compartment are
free of electrolytic contamination.
Any contamination of the battery contacts or
compartment should be cleaned with a dry cloth.
Note: The PrimeTest 100 contains no user
serviceable parts. If an Error warning
should appear on the display please
contact the manufacturer or an authorised
Seaward Service Agent for advice.
6 Battery Check
The PrimeTest 100 is powered from a 6 AA cells
which are checked before a test is performed. When
the battery voltage is low the enunciator
is illuminated. The unit will continue to perform
within specifi cation for a limited number of tests,
dependent upon the type of the batteries fi tted.
When the battery voltage reaches a level where the
performance is affected the enunciator will
fl ash and all test keys are disabled. The batteries
must be replaced.