Scotsman 600 Prodigy Eclipse - Manual (Page 20)

Water and Drain
The ice making section requires an adequate
potable water supply and a gravity drain.
Determine how the drain will be connected to the
ice making section.
·
If access is available behind the unit, route the
drain in from the back.
·
If the unit is to be flush mounted to the back of
the dispenser and tight against the wall, route
the drain out either the left or right back corners
In some tight situations it will be necessary to
assemble the ice making section to the dispenser
or bin and install the water and drain connections
before placing the system in its installed position. A
loop of water supply tubing will allow movement of
the system.
In other tight situations the unit should have its
water and drain tubing connected and stubbed out
before placing on the dispenser or bin.
The drain fitting is adaptable to drain connections
to the left, right and back.
The unit is shipped ready to drain right. The drain
fitting elbow with PVC adapter can be rotated to
drain right, left or back.
Prodigy Eclipse
ä 600, 800, 1000
February 2008
Page 20
Back View of EH222
Drain
Fitting