RJS Inspector D4000 Auto Optic (FIRMWARE version A.06 and Later) - Manual (Page 9)

Operator
’s Guide
Inspector D4000
™ Auto Optic
002-5564 RJS, Minneapolis, MN 1
1.0 Preface
1.1 Proprietary Statement
The RJS Inspector D4000 Operator
’s Guide contains
proprietary information of RJS. It is intended solely for
the use of parties operating and maintaining the equip-
ment described herein. This information may not be
used, reproduced, or disclosed to any other parties for
any other purpose without the express written permission
of RJS.
1.2 Statement of FCC Compliance: USA
The equipment described in this manual has been tested
and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide a reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with this
operator
’s manual, may cause harmful interference to
radio communications. Operating this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
problem at your own expense.
1.3 Statement of FCC Compliance: Canada
This Class A digital apparatus meets all requirements of
the Canadian interference-Causing Equipment Regula-
tions.
Cet appareil num
énque de la classe A respecte toutes
les exigences du R
èglement sur le maténel brouilleur du
Canada.