RJS Inspector D4000 Auto Optic (FIRMWARE version A.06 and Later) - Manual (Page 63)

Operator
’s Guide
Appendix H
002-5564 RJS, Minneapolis, MN 55
Appendix H (Print Functions)
Print Functions
Scanned data may be printed if the RJS Inspector
D4000 is connected to a printer with an interface cable.
Press the Print button at any time to display:
Printout Type
Analysis Only
The lower row will contain one of three options that are
scrolled with the Select button.
With the selected option chosen, press either Enter or
Print to start printing.
Printout Options
Analysis
This option prints the Text Analysis data for the last
symbol scanned. This option can also be used to print
each individual symbol in the multiple scan mode prior to
the last scan being completed. (See Figure I-2)
Analysis and Profile
This option is the same as Text Analysis but in addition
prints an Analog Scan Profile (See Figure I-1).
Storage
This option prints all analysis data stored in the buffer.
The last bar code that was scanned is printed first.