RJS Inspector D4000 Auto Optic (FIRMWARE version A.06 and Later) - Manual (Page 10)

Inspector D4000
™ Auto Optic
Operator
’s Guide
RJS, Minneapolis, MN 002-5564
1.4 CE:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in ac-
cordance with this operator
’s manual, may cause har
m-
ful interference to radio communications. Operating this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the problem at your own expense.
1.5 Documentation Updates
RJS strives to provide the best possible documentation.
This manual, or any of our manuals, may be updated
without notice.
1.6 Copyrights
The copyrights in this manual are owned by RJS. All
rights are reserved. Unauthorized reproduction of this
manual or unauthorized use of the software may result in
imprisonment of up to one year and fines of up to
$10,000 (17 U.S.C.506). Copyright violations may be
subject to civil liability.
1.7 Unpacking and Inspection
Carefully unpack the components and save the contain-
er. If the container is crushed, punctured or water
damaged you can use the container to prove a claim
against the carrier. RJS is not responsible for transpor-
tation damage.
Your RJS Inspector D4000 is packaged in a custom made
container. After removing the unit from the shipping box
makes sure you have:

Main display unit

Auto-optic scan head and cable

Calibration plaque

Four size AA batteries

Operator
’s manual

Bar code
“test” sy
mbol sheet