RJS Inspector D4000 Auto Optic (FIRMWARE version A.06 and Later) - Manual (Page 11)

Operator
’s Guide
Inspector D4000
™ Auto Optic
002-5564 RJS, Minneapolis, MN 3
1.8 Installing Batteries
Slide opens the plastic cover on the back of the unit.
Position the cloth battery
“pull strip” down then insert 4
(included) batteries according to the positive/negative
markings.
Note:
If all 4 batteries are inadvertently installed backwards,
the inspector unit will be damaged.
Remove batteries when the unit will not be used for a
period of weeks. Also, remove batteries when storing
the unit.
Note:
NiCad batteries and charger are available as an option
Warning:
When using the optional charger, DO NOT charge alka-
line batteries - this will damage the verifier