RGBLink VSP 628S User Manual - Manual (Page 98)

VSP 628S User Manual 98
Balance
Belden 1694A 100m self-adaptive 3G,200m self-adaptive
1.485G,350m self-adaptive 270Mbps
Signal Level TMDS pwl , 165MHz bandwidth
SDI Loop-through (3G module)
Number of
Loop-through
1
Connector Standard BNC Socket
Signal Level 800mV±10%
Supported Resolution SMPTE：625/25 PAL, 525/29.97 NTSC,625/50p PAL,525/59.94p
NTSC,
720p50,720p59.94/60,1080i50,1080i59.94/60,1080p50,1080p59.
94/60,
Driver Belden 1694A 150mself-adaptive 3G, 200m selt-adptive
1.485G,350m selt-adaptive SD 270Mbps
CVBS Loop-through
Number of Outputs 3
Connector Standard BNC Socket
Supported Standard PAL/NTSC
Signal Level 1Vpp±3db (0.7V Video+0.3v Sync ) 75 ohm
Supported Format 480i,576i
S-Video Loop-through
Number of Outputs 1
Connector Standard DIN4 Socket
Supported Standard PAL/NTSC
Signal Level Y:1Vpp±3dB (0.7V Video+0.3v Sync ) 75ohm
U/V:0.7Vpp±3dB 75ohm
Supported Format 480i,576i
VGA Loop-through
Number of Outputs 1
Connector Standard DB9 Socket
Supported Standard VGA-UXGA
Signal Level R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75
ohm
black level：300mV Sync-tip：0V
Supported Resolution VGA-UXGA (800*600@60, 1024*768@60, 1280*1024@60,
1440*900@60,1600*1200@60)
DVI Loop-through
Number of Outputs 1
Connector Standard DVI-I Socket