RGBLink VSP 628S User Manual - Manual (Page 41)

VSP 628S User Manual 41
In addition, user can set RED BRIGHTNESS, GRN BRIGHTNESS, BLU
BRIGHTNESS, RED CONTRAST, GRN CONTRAST, BLU CONTRAST,
DETAIL ENHANCEMENT and NOISE REDUCTION.
GAMMA: Gamma setting, press it can adjust the image gamma value;
Gamma value include as following: 1, -1.2，-1.4，-1.6，1，1.2，1.4，1.6，
SRGB;
ASPECT RATIO: Proportional setting, press it, can realize the conversion
between high and wide.
Normal: Original video proportion, 4:3 aspect ratio; 16:9 aspect ratio;
MIRROR-IMAGE: Image rotate setting, press it, user can DISABLE or
ENABLE the image.
DVI1 OUT ADJUST：
DVI1 OUT RANG: DVI1 out range adjustment, can choose RGB or
YCBCR;
HDMI/DVI1: Can select HDMI agreement or DVI1 agreement;
DVI1 DE: Can adjust DE for DVI1;
DVI1 H START: Can adjust horizontal start position for DVI1;
DVI1 V START: Can adjust vertical start position for DVI1;
DVI1 WIDTH: Can adjust width for DVI1;
DVI1 HEIGHT: Can adjust height for DVI1;
MENU--- SCREEN PARAMETER
Select SCREEN PARAMETER, rotate the knob, show level 2 menu as
follows:
FULL SIZE：User can set full size.
LED SCREEN SIZE：User can set LED screen size by SCALE and
POSITION button.
SAVE: Save the screen parameter.
MENU--- VIEW
Spin the knob to SAVE in the Menu and push the knob to confirm. Rotate