RGBLink VSP 628S User Manual - Manual (Page 90)

6. SYSTEM SETUP AND OPERATION
How to Achieve Cross-platform WEB Setting?
VSP 628S User Manual 90
How to Achieve Cross-platform WEB
setting?
First, the formation of LAN Remote Control Platform: one ipad or one iphone,
one router (with wireless functions, for example with a wireless-enabled
VPN router models: Netcore 255 and 266; Volans VE760W, 982W.), one
VSP 628S processor (can be more processors, as long as the network
interface can be connected to the router)
The first step: LAN Physical Connection ： connect VSP 628S and routers by
CAT5, and connect routers by CAT5, please use the LAN Ethernet port,
WAN port is only used to connect to external networks, it ’s not allowed to
use in this step.
Connection diagram is as below：
The second step：IP address setup ，Please refer to IP Setup steps which in
the
― How to achieve remote control settings in the LAN sections. (Make
sure that processors IP address and router IP address are in the same
band. )
When users use ipad or iphone, you can directly use the Safari browser,
enter the URL 192.168.0.100 (default) and run. If user using other types of