Large screen only display part of the image, Signal need to scale, No display in the second half part of large screen – RGBLink VSP 628S User Manual User Manual

Page 95: Resolution is inadequate, Sending card can't take lower part, Left of the screen appears two black sides, Adjust de deviation

VSP 628S User Manual 95

Signal need to scale

Press 【SCALE】button in the processor and knob to adjust the actual

screen size of the screen, combined with button【POSITION】, including the

"Width", "Height" and "Starting position", remember to touch the knob to

confirm.

Resolution is inadequate

Please make sure the points of the screen width and heigh, choose the

resolution to be bigger than screen width by button【MENU】 under

OUTPUT RES, and touch knob to confirm.

Sending card can't take lower part

TS 802 can control the max horizontal resolution 2048, and vertical

resolution 640. Each CAT5 output is 320 pixels.

Adjust DE deviation

This phenomenon needs to adjust the DVI output and DE migration of the

processor, through the 【MENU】 to find "OUTPUT" and find the

corresponding output name, such as "DVI1 OUT ADJUST", and find "DVI1