RGBLink VSP 729 - Manual (Page 91)

6. System Setup and Operations
Multiview Matrix Function
VSP 729 User Manual 91
Multiview Matrix Function
If the above operation can't meet the user's pictures showed demand.Such
as want the both side picture of screen be the same size when use three
picture.Or want seamless switch between three picture and the main
picture of three picture.Now need to use VSP729 Matrix.
VSP729 set up a matrix function,It means any input channel can give to
any layer.So can be showed four same signal source on the screen
through the function.
If need to the both side picture of three picture show the channel 1
signal,and realize seamless switch between three picture and the main
picture of three picture.Press MENU firstly,and running the knob switch to
select Matrix,then Press NEXT to enter ,and running the knob to select the
corresponding layer.Such as lay 3.Press NEXT to enter ,running the knob
to select the corresponding input channel ,Such as when need to show
channel 1 signal,please select channel 1,Press NEXT to affirm.In the same
way layer 4 select channel 2.In the same way,layer 4 select input channel
2,after setting Press CUT or TAKE to switch.If still need to use the setting
the next time,just need to SAVE 1 to save the above setting.So the setting
can be used again the next time.