Vsp 729 front panel keyboard operation, Hardware orientation – RGBLink VSP 729 User Manual
Page 32
2.Hardware Orientation
VSP 729 Front Panel Keyboard Operation
VSP 729 User Manual 32
VSP 729 Front Panel Keyboard Operation
Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last
setting config and send processed image to the target monitor. For the first
setup, CV1 input is default source. With front panel keyboard, user can
operate VSP 729 through the menus on LCD panel.
VSP729 front panel
as shown in figure
:：
VSP 729 can be connect to the LAN through network
Cable,if the connection can not Find the LAN ,
it will show DHCP Failed
If connection to the LAN works,it will get a
Auto config IP address.Shown as following
AVDSP Series VSP 729
Wait Init Network…
Finish Network!
DHCP Failed
RGBLINK
IP Address
192.168.0.100