RGBLink VSP 112W User Manual - Manual (Page 74)

5. Communication Software Guideline
How to Connect PC Through LAN Interface?
VSP 112W User Manual 74
The third step:Equipment IP address :192.168.0.100；
Computer IP address :192.168.0.15；
The four step :two IP address in the same band,192.168.0.XXX,the fourth
section number is not the same,can communication connection line CAT5.
Note
If the computer IP address and equipment
address are different,two IP address not in the
same band,for example,the computer IP
address is 218.032.010.201 ； Equipment IP
address :192.168.0.100；
Solution 1:change the IP address of the video
processor for :218.032.010.xxx。
Change the IP address ,push
button ,enter into
ADDRESS>,you can change IP address ，
change the IP address of the video processor
and computer’s IP address in the same band，
218.032.010.xxx，more detailed please refer to
the operation of ,Restart
the processor.
Solution 2:change the computer IP address for
192.168.0.xxx；
Open network connections,right click on
properties,