RGBLink VSP 112W User Manual - Manual (Page 68)

5. Communication Software Guideline
Software Operation
VSP 112W User Manual 68
IP SETUP: shown as follows:
Specific operation is as follows:
Network Setting:
1. Choose ―Network Setting‖ 2. Choose the network mode, if
choose ―Static IP‖, input the
network parameters. If choose
―DHCP‖, then the DHCP server will
assign IP address automatically.
Broadcast port is default 3999, do
not change it.
3. After setting, click ―Set Network
Address ‖, then Red Player will restart,
make other settings after restart.