Menu---input, Menu ---output, Input – RGBLink VSP 112W User Manual User Manual

Page 39: Output, Menu orientation

4. Menu Orientation

VSP 112W User Manual 39

Select INPUT, press it to confirm, show level 2 menus as follows:

INPUT DETAIL: Display input signal information, including CV1, CV2,

DVI, VGA, USB.

ZOOM ADJUST: It can adjust the position and the scale, as following:

H SIZE: Width setting.

V SIZE: Height setting.

H Pos: Horizontal phase setting.

V Pos: Vertical phase setting.

RESET: If quality image distort by mistake in improper operation, it can be

initialized operation to recover factory setting.

VGA ADJUST： Mainly aimed at H POS, V POS, CLOCK, PHASE when

VGA input. It also can use the AUTO ADJUST to adjust.

ADC AUTO ADJUST：Mainly aim at the BRIGHTNESS to auto adjusting.

USB ADJUST： Mainly aimed at H POS, V POS when USB input. It also

can use the AUTO ADJUST to adjust. If quality image distort by mistake in

improper operation, it can be initialized operation to recover factory setting.

Select OUTPUT, press it to confirm, show level 2 menus as follows:

OUTPUT DETAIL: Display output signal information, including DV1, DV2,