RGBLink VSP 112W User Manual - Manual (Page 42)

4. Menu Orientation
MENU
VSP 112W User Manual 42
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
RATIO: Proportional setting, press it, can realize the conversion between
high and wide.
Normal: Original video proportion, 4:3 aspect ratios; 16:9 aspect ratios;
PICTURE: Picture setting, the sub-menu as following:
BRIGHTNESS: It can change the image color BRIGHTNESS via
BRIGHTNESS Settings.
CONTRAST: It can change the image color CONTRAST via CONTRAST
settings.
SATURATION: It can change the image color SATURATION via
SATURATION Settings.
SHARPNESS: It can change the image color SHARPNESS via
SHARPNESS Settings.
COLOR RED: It can change the image color Red via Red Settings.
COLOR GREEN: It can change the image color Green via Green Settings.
COLOR BLUE: It can change the image color Blue via Blue Settings.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
Users can set according to their actual situation, this function mainly
suitable for these very professional for image quality. Non-professionals
are not suggesting above operations. If quality image distorted by mistake
in improper operation, it can be initialized operation to recover factory
setting.
The numerical range that needs adjusting is between 0-100. Press MENU
to exit and return to higher level MENU.
PIP: PIP setting, press PIP and choose ON to set PIP mode.
LAYOUT: Can choose PIP layout, the corresponding results are as follows: