How to change the output resolution, System setup and operations – RGBLink VSP 3600 User Manual User Manual

Page 98

6. System Setup and Operations

How to change the output resolution?

VSP 3600 User Manual 98

Firstly, ensure the equipment is on power and run normally. For details,

please refer to:

Button operation is as follows:

1. VSP 3600 provides 12 kinds of common output formats for user;

2. Click【MUNE】key, key lights;

3. Set LED panel scan menu, light spin UP/DOWN knob to select

OUTPUT CONFIG;

4. Press【NEXT】to enter the menu，light spin LEFT/RIGHT knob to select

OUTPUT FORMAT;

5. Press【NEXT】 to enter to the menu，light spin LEFT/RIGHT knob to

select output resolution;

6. Press 【NEXT】 to set, that is, to realize the operation of changing

output resolution.

UVP 360

*OUTPUT CONFIG >>

OUTPUT CONFIG

*COMMON FORMAT >>

COMMON FORMAT

>1920x1080x60 <>