How to achieve subtitles superposition, System setup and operations – RGBLink VSP 3600 User Manual User Manual

Page 118

6. System Setup and Operations

How to achieve subtitles superposition?

VSP 3600 User Manual 118

Firstly, ensure the equipment is on power and run normally. For details,

please refer to:

Button operation is as follows:

1. When VSP 3600 is under PIP effect mode, in EFFECTS area,【PIP】

key lights;

2. In EFFECTS area, press【DSK】key, key lights, color extraction

function starts;

3. LED panel prompts menu option, light spin up/down knob, select KEY

MODE model, and there are two kinds of modes:

LCD picture: KEY MODE OUT is delete for the setting color value, and the

color value is set in KEY COLOR;

LCD picture: KEY MODE OUT is keep for the setting color value, and the

color value is set in KEY COLOR;

Spin LEFT/RIGHT knob, select the mode;

4. Light spin UP/DOWN knob, choose KEY COLOR setting, set the color

value:

LCD picture: SET R MIN/MAX is the setting red keyer value range;

LCD picture: SET G MIN/MAX is the setting green keyer value range;

LCD picture: SET B MIN/MAX is the setting blue keyer value range;

Spin UP/DOWN knob, select R, G, B to set the minimum and maximum

option;

Spin LEFT/RIGHT knob to set minimum and maximum option;

5. Observe keyer results through output to achieve a better setting;

Note

When DSK is under effect mode, it only set DSK

effect for D layer, other layers is invalid. (Version

1.1 specifications)