RGBLink VSP 3600 User Manual - Manual (Page 119)

6. System Setup and Operations
How to save the current setting parameters?
VSP 3600 User Manual 119
How to save the current setting
parameters?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 function setting is finished, VSP 3600 provide 10
groups of saving modes in order to avoid setting again when you use
the same function or set again after restarting because of power out.
2. In CUSTOM ADJUSTMENTS area, press【 Save 】 key , 1, 2, 3, 4,
ALL key in SOURCES area, and DVI1, DVI2, DVI3, DVI4 key in
OUTPUTS area, Freeze key light, then enter the user save option;
Choose the appropriate position and save.
SAVE TO 1 corresponding button 1 in SOURCES area;
SAVE TO 2 corresponding button 2 in SOURCES area;
SAVE TO 3 corresponding button 3 in SOURCES area;
SAVE TO 4 corresponding button 4 in SOURCES area;
SAVE TO 5 corresponding button ALL in SOURCES area;
SAVE TO 6 corresponding button DVI1 in OUTPUTS area;
SAVE TO 7 corresponding button DVI2 in OUTPUTS area;
SAVE TO 8 corresponding button DVI3 in OUTPUTS area;
SAVE TO 9 corresponding button DVI4 in OUTPUTS area;
SAVE TO 10 corresponding button Freeze in Layer Functions area;
3. LCD displays as follows, rotate UP/DOWN knob, and choose save
position;
SAVE
>SAVE TO 1~10