RGBLink VSP 628PRO Quick Start - Manual (Page 9)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
8
3. Turn the knob, and choose main or sub image.
4. Choose the signal, and the selected image will be switched to this signal.
Scale Setting
Push the [SCALE] button, and enter to the scale function menus, user can adjust the H size, V size, H/V
size, H pos, V pos and scaling mode by knob or number buttons. If image quality distorts by improper
operation, it can be recover by reset.
Note: In PIP mode, user need to choose the image that to set in option before setting.
Image Size Adjust
Push the [MENU] button, and enter to the menu items. Turn the knob, and choose , push the
knob to confirm. Turn the knob, choose , push the knob to confirm. User can adjust the
H size, V size, H pos V pos, and mask top, bottom, left and right of the image by knob or number
buttons. If image quality distorts by improper operation, it can be recover by reset.
Note: In PIP mode, user need to choose the image that to set in option before setting.
Dimmer and Effects Setting
Push the [DIMMER] button, and enter to the menu items, user can set the dimmer and effects. The
adjustment value range of dimmer is 0~100.
The setting for effects include brightness, contrast, chroma, hue, color temperature, color correction,
gamma, brightness, H sharpness, V sharpness, noise reduction, Invert, Flip V, Flip H and Flip 90
degree.
Note: User can also choose in option by pushing the [MENU] button for setting.
2. Dual 2K
In this mode, the two channels output independently, CHA outputs to DVI and VGA, CHB outputs to
HDMI, CHA and CHB can input any signal and set different resolutions, but can not support fade in fade