How to realize lan remote control setting – RGBLink VSP 628PRO Quick Start User Manual

Page 14

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

Firstly, To realize LAN remote control need to build up a LAN platform including: ①One computer

(Laptop or computer, used to do remote control which installed windows control software in the

computer).②One router (Better to have wireless function which may realize WEB control cross different

platform; without wireless function is available but only realize cable remote control. No limitation for

router

’s model and brand, such as VPN router model: Netcore 255 or 266; Volans VE 760W or 982W).

③One VSP 628PRO processor (as long as the router

’s network ports can connect to, user can place

multi pieces of VSP 628PRO).

Step one: LAN physical connection. Connect VSP 628PRO and router with network cable, then connect

computer and router with network cable also, use the LAN port of router, WAN port is used for

connecting to outer net. Sketch map as below:

Step two: IP address setting (processor

’s default IP address is 192.168.0.100)

Firstly change computer

’s local connection to “automatically getting the IP”, showed as below: