RGBLink VSP 628PRO Quick Start - Manual (Page 27)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
26
VSP 628PRO Connect APP Control Operation
1. Download the APP
User can log in the Apple or Android system to search and download the video processor client APP,
then install the VSP 628PRO client APP on mobile phone or IPAD, shown as . After the
installation is completed, the mobile phone or IPAD will show the icon .
2. APP Control Interface Introduction
WIFI Network cable
1. Prepare a router that with wireless internet and DHCP function, connect and set the router by
computer before connect to VSP 628PRO, and enable the IP and DHCP function. (For more details
about setting, please refer to router ’s instruction).
2. Connect the LAN port of router to the LAN port of VSP 628PRO with the network cable.
3. Connect to the router by IOS or Android device, system default IP automatic access, use the web
browser to access “192.168.0.100”, the default IP address of VSP 628PRO, if the IP address is
changed, please enter the changed IP address. (Set path: MENU->System->Ethernet->IP), user
can wirelessly control VSP 628PRO after loading.
⑴ Make sure the device is connected to the router, power on, after the device is stable,
turn on the mobile phone or IPAD APP to search and connect the device, as follows: