RGBLink VSP 628PRO Quick Start - Manual (Page 15)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
14
Secondly refer to router ’s instruction (user manual, specification), and find out router’s default network
segment.
If router ’s default network segment is 192.168.0.1, then it is same to processor IP address segment,
open up windows control software and user can directly control on VSP 628PRO.
If router ’s default network segment is 192.168.1.1, then user need to change router’s default gateway
or change processor
’s IP, both methods are available, but we suggest to change processor’s IP.
Method one: Change processor ’s IP.
Push the [MENU] button on front panel and go into items as below picture shows. Change processor ’s
IP to be 192.168.1.100, confirm and restart the processor, then user can directly control on VSP
628PRO via windows control software.
Method two: Change router ’s gateway.
Type in 192.168.1.1 on the browser and go into router setting.
Type in default account and code (please refer to the router user manual for the information).