RGBLink VSP 628PRO Quick Start - Manual (Page 16)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
15
Go to router setting part and find out “LAN port setting”, change the default value “192.168.1.1” to be
“192.168.0.1”;
Save the setting and restart the router, then user can directly control on VSP 628PRO via windows
control software.
How to Realize WEB SERVER Cross-platform Setting
First, the formation of LAN Remote Control Platform: one Ipad or one Iphone, one router (with wireless
functions, for example with a wireless-enabled VPN router models: Netcore 255 and 266. Volans
VE760W, 982W.), one VSP 628PRO processor (can be more processors, as long as the network
interface can be connected to the router)
The first step: LAN Physical Connection: connect VSP 628PRO and routers by CAT5, and connect
routers by CAT5, please use the LAN Ethernet port, WAN port is only used to connect to external
networks, it ’s not allowed to use in this step.
Connection diagram is as below:
The second step: IP address setup. Please refer to IP Setup steps which in the “How to Realize LAN
Remote Control Setting” section. (Make sure that processors IP address and router IP address are in
the same band.)