RGBLink New Driver Quick Start - Manual (Page 8)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
7
How to Connect
Connect the HDMI output of computer to the HDMI input interface with HDMI cable.
Connect the DVI player or computer with DVI interface to the DVI interface with DVI cable.
Connect the receiving card of LED Display to the Gigabit Copper Port with cable.
Plug in power cord with IEC connector.
If need to connect to the computer for control, connect the computer to the USB control port of
sending card with USB cable.
How to Work
Switch ON the power button, then the red indicator will glow to indicate the device is in normal
operation. When the both DVI and HDMI signals are given as inputs to the device, the green signal
indicator lights up. Since the HDMI is the first priority than the DVI signal, so that the output will be the
HDMI signal. When the HDMI signal cable is pulled out, the green signal indicator lights up, then the
device output is the DVI signal.