beautypg.com

RGBLink New Driver Quick Start User Manual

Page 19

background image

Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected] http://www.rgblink.cn

18

3. Connect the power line of sending card, (connect to the position marked LINSN POW of the MCU

board), take a 4 pin 2.54 mm pitch cable, and connect referring to the following figure:

4. Connect the signal and power indicator light cable of sending card, take each 2 red and black lines,

and connect 2 black lines to the end of MCU board (Part B), and connect 2 red lines near the edge of

the MCU board (Part A). Please refer to the following figure: