RGBLink New Driver Quick Start - Manual (Page 14)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
13
c. Turn the knob, choose [RECEIVING CARD SET], push the knob to confirm. Turn the
knob again, and choose [CHOOSE NETWORK], push the knob to confirm. Turn the
knob, choose Port D and push the knob to confirm.
d. Turn the knob, and choose [D PORT Offect (A/B) Y], push the knob to confirm. Turn
the knob, set D PORT Offect (A/B) Y as 240 (Note: D PORT Offect (A/B) Y
=VERTICAL CARD×HEIGHT, before we set horizontal card as 2 and height as 120).
Shown as follows:
e. Turn the knob, and choose [CONNECT CARD TYPE], shown as follows:
>SENDING CARD SET >>
RECEIVING CARD SET >>
SENDING CARD SET >>
>RECEIVING CARD SET >>
>CHOOSE CABLE PORT D
HORIZONTAL CARD 0
VERTICAL CARD 0
WIDTH 0
HEIGHT 120
D PORT Offect (A/B) X 0
> D PORT Offect (A/B) Y 240
CONNECT CARD TYPE >>