RGBLink VENUS X1 Quick Start - Manual (Page 17)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
16
Go to router setting part and find out “LAN port setting”, change the default value “192.168.1.1” to be
“192.168.0.1”.
Save the setting and restart the router, then user can directly control on VENUS X1 via windows control
software.
How to Save the Parameter
VENUS X1 provides 36 save preferences, operations are as follows.
1. Push the [SAVE/1] button, the button light is on, and enable the SAVE function.
2. Turn the knob, and choose the position that will save, push the knob to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means SAVE1~10, user can push any button
on to save. For example, save to SAVE 2, push button 2, the OLED panel will show as follows after
saving.
SAVE TO
—
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
—
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite